The Reign Of Terror

The Reign Of Terror Throughout time, people have always been able to survive by using the things around them in innovative ways. Their cultures have also greatly influenced them. Whatever was happening at the time, they had to react and adapt their lifestyles. These changes almost always led to new inventions such as the guillotine. The guillotine was first introduced into France during the French Revolution on April 25, 1792. The first execution was that of a highwayman. The guillotine was also used in Scotland, England, and many other European countries. During the French Revolution, there were many important events that led up to the Reign of Terror, during which people were looking for a more efficient means of execution.The revolution in France happened for many reasons. First, France was in a financial crisis; it was on the verge of becoming bankrupt. The country went into debt after helping to finance the Seven Years' War and the Revolutionary War in America.The Wanderer is set during the Reign o f Terror, ex...Second, the people of the middle and lower classes were very unhappy. Third, people were beginning to have new ideas concerning the way the government functioned. King Louis XVI wanted to collect new taxes to pay for France's debts. So, he called his Estates-General to support him in his desire. Of course, the noblemen and clergymen approved, since they were not held responsible to pay the tax. The commoners did have to pay the tax, and they were always outvoted due to the fact that each estate only received a single vote.Angrily, the third estate demanded more votes. After all, they had more members than the first two estates combined. The third estate wanted all three estates to merge into one national assembly. In this new government, each representative would receive a vote. By June of 1789, the commoners had declared...

The Other N-Words

The Other N-Words The Other N-Words The Other N-Words By Mark Nichol My recent post about terms for ethnic groups prompted a note from a site visitor proposing that I write about taboo words. I was not niggardly in my gratitude to the correspondent for his suggestion. Did your eyes just pop out when you read the fourth word in that last sentence? Unlikely, because most DailyWritingTips.com visitors know that niggardly has nothing to do with a similar-sounding offensive term for black people. But many people persist in thinking it does. In the late 1990s, an employee of the Washington, DC, mayor’s office resigned in the aftermath of his innocent use of the word, and a few years later, a schoolteacher came under fire when she included the term in a vocabulary lesson. Another person has noted that he avoids using the word renege around black people, even though it has nothing to do with the derogatory word nigger, derived from Negro. Nor does niggling, but some people argue that such near homophones should be tossed from the word-hoard because somebody, somewhere might be offended. Nitty-gritty, part of the idiomatic expression â€Å"get down to the nitty-gritty,† is a hoary word (oops perhaps I shouldn’t have used that adjective), but it’s also evocative. Unfortunately, some people believe erroneously that it originally referred to the excretory debris left in a slave ship after the cargo had been removed. Evidently, nitty-gritty was in fact originally a synonym for an adjective that rhymes with its component words, but now it is merely synonymous to business in â€Å"get down to business.† What about the original n-word? Did you flinch when I used it above? How dare I type the actual word! Well, it’s in the dictionary, for one thing, and I have a valid reason to use it in this dispassionate, scholarly context. (But I admit I’d hesitate to use it in front of one or more black people, even if I were reading this post aloud in a group setting.) Should nigger be allowed in print or online? It’s absurd to dodge it in a neutral context such as a post about usage. How about in literature? Mark Twain used it in Huckleberry Finn to further identify the fugitive slave Jim. Doing so was proper in the historical context of that work, and no one can deny that Twain considered Jim one of his most admirable characters. And anyone who refrains from using it in a valid literary context in a novel about young inner-city blacks who blithely bandy it about, for instance is self-censoring. The word is, admittedly, broadly unacceptable in written and spoken discourse. But should I be prohibited from using it in an essay about derogatory or allegedly derogatory language? Should it be stricken from reprints of Huckleberry Finn, and excuse the expression blacked out in all existing copies? Should a book about the ’hood omit it? The word is used countless times every day all over the United States. Most writers and speakers are justified in using it because they are black, and they’re taking it back, or because it’s being used in a valid context. Others, racists who use it to denigrate an ethnic group, are also justified because they are exercising a constitutional right to free speech, but that doesn’t mean I like it. Do we even have a right, if we’re not black, to decide whether to use it? It has eminently painful associations for black people, regardless of whether it has been used against them as a weapon. For that reason, I’m sensitive enough to use it only in this type of context. But I won’t refrain from using it as such, and I certainly won’t avoid writing or saying niggardly or niggling under any circumstances. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Expressions category, check our popular posts, or choose a related post below:Fly, Flew, (has) FlownFlied?Taser or Tazer? Tazing or Tasering?35 Synonyms for Rain and Snow

Nature Versus Nurture, which is responsible for leaders Assignment

Nature Versus Nurture, which is responsible for leaders - Assignment Example In order to understand whether or not leaders are natural born or nurtured into a leader, it is important to understand what exactly defines a leader and what type of traits a leader should posses. A leader can be defined as someone who is able to lead others. To lead others is to conduct plans and implement plans in a way other can easily follow. It is also important for a leader to be able to lead others in a way others will want to follow. Possessing a personality that is favored by many is a necessity for someone to be a leader. A leader is able to lead others into a specific event and lead others in a certain directions. Leaders need to have specific traits. Specific traits a leader should posses would include a strong personality. Strong personalities allow a leader to not easily be manipulated and stay focused. A leader must also posses’ traits that allow him or her to be organized. Being organized shows others that as a leader one is confident and well structured. A leader needs to work well under stress. Being able to work well under stress will allow for a leader to take on large tasks without easily becoming discouraged. The more personable one may be, the more able the leader is to obtain followers. A leader is not a leader unless people are willing to follow with their own free will and not by force or fear. Anyone can lead by fear but a true leader leads by personal choice. Knowing what a leader is and specific traits a leader should posses help to further explore the idea that leaders are both born with specific traits and nurtured by proper upbringing. Intelligence is a perfect example as to how leaders can be born leaders. A leader needs to have a certain level of intelligence in order to lead others. One who is born with a higher level of intelligence is able to learn fast, stay focused and keep up with the demand it takes to lead. It would be hard to lead others if one was lacking necessary skills such as

Contrasting programs and policies related to poverty Research Paper

Contrasting programs and policies related to poverty - Research Paper Example On the other hand, it can be apparently observed that America is still undergoing through a tough phase in tackling its poverty level, which fluctuates on a constant basis (The World Bank Group, 2014). With this concern, the research paper would describe the programs along with the policies associated with poverty that adopt and implement by the countries i.e. the US and China. Moreover, a comparison would also be taken into concern regarding the same in the discussion of the research paper. Prior to contrasting the programs along with the policies associated with poverty between China and the US, a detailed description of these programs as well as policies of both the nations has been provided hereunder. Since the year 1980, the Chinese government has shown significant improvement in declining the poverty rates. The projected poverty rate in China in the year 1980 was estimated 84%, which came down to 13% by the year 2012. The reason contributed in making this terrific improvement is the rise particularly in GDP rates. This can be justified as that the GDP rate rose from 1.89% in the year 1980 to 11.57% in the year 2012, which further resulted towards increase in per capita income by nearly about 30 folds from $205 to $6064 in recent times (The Economic Times, 2013). However, despite the significant success in uplifting the critical concern of poverty, China in the current scenario, is still facing certain issues relating to poverty. In this regard, the increase in the inequality levels and the concentration of the left over poverty populaces in the rural areas are becoming critical concern for the Chinese government (The World Bank Group, 2014). As a corrective measure, China along with ‘The International Bank for Reconstruction and Development (IBRD)’ has concentrated their efforts on two vital aspects. One of these is the pilot projects that will be brought under superior technical

Amin Maaloufs Idea Essay Example for Free

Amin Maaloufs Idea Essay My understanding of Amin Maalouf’s concept on identity is that human identity is based on an individual’s environment. He defines identity into two categories. One that is inherited through our elders and cultural beliefs â€Å"vertical†, and another that exist according to our generational influence, â€Å"horizontal†. The two categories create our identity as a human and is the source of our behavior. My experience with the vertical heritage is my belief in Christianity. My ancestors and the community I was raised in have traditionally taught me to celebrate religious holidays like Christmas and Easter. I also grew up in a small neighborhood with Christian peers. They have influenced the way I behave and interact by helping to shape my morals. My experience with the â€Å"horizontal† is the communities I have been introduced to, such as, the public and private school environments. They have broadened my personality with their social aspects. One example of what Maalouf is saying is my switch from public to private school. My personality was much different in public school than it was in private. In my public school the social standard for academic progress was average. The fact that there was no assigned dress code distracted me because I would attempt to impress others with my appearance. This influenced my train of thought, behavior and ultimately my identity, until I was placed into a different setting. When I made the switch to private school the distraction of looking different was taken away, and expectations were higher. My surrounding influenced me again and I became more focused on things that mattered and more questionable of my beliefs. What I gained from both these settings was my horizontal inheritance. For example, the music that I listen to and the hobbies I enjoy. Maalouf’s point is that no matter your vertical, your horizontal has a bigger affect on your identity, and since the horizontal is based on contemporaries, you are based on the subjects around you. He points out that there is a gap between what we think we are and what we actually are in reality. We may know we are different but what we don’t realize is in reality we are only becoming identical through arguing are differences. I believe this is a magnificent insight on identity. Mankind changes the world around us and if we all do the same, we end up in each other’s world. We are becoming more and more identical to each other through compromise from arguing our differences because we learn to live with each other. When we accept differences they soon become norms, and once they are norms, they become a standard. I agree with Amin Maaloufs concept on identity.

Drinking Water Sustainability Essay -- Potable Water Scarcity

Introduction The importance of water, in relation to the Earth and its inhabitants, can only be rivaled by the importance of oxygen. Living things depend on water in their habitat. However, the abundance of water is not as important as the usefulness of the water. Much of the Earth is made up of this unique liquid combination of hydrogen and oxygen, but the amount that can be used for human consumption is less than one percent (Boland, 2003). In essence, humans use potable water, water that is suitable for drinking and cooking, to satisfy their basic needs. Drinking (potable) water is free from poisonous substances, contaminants, and disease-causing organisms, which would be unsafe for human consumption (Gulflink). In pre-historic times, inhabitants understood the importance of water sustainability for survival of the population. In ancient civilizations, water sustainability and potable water were both emphasized as ideals for the progress and continuity of the societies. Today, humans continue to progress in their understanding and utilization of technological processes to develop potable water. As a result, water filtration, water management, and water conservation efforts are becoming more effective and commonplace. Thus, as the technology continues to improve the quality of water as a resource, we cannot forget the basis to which past cultures had accepted: the continual existence or sustainability of this limited resource. Abstract A Historical Perspective Man’s existence relies on water, and he cannot survive for more than seven days without it. M.N. Baker, a water quality historian, states, â€Å"In the earliest days of the human race, water was taken as found. It might be pure and abundant, plentiful but mud... ...ment in the twenty-first century: What should we do, not what can we do? The National Academies. . Accessed 11 October 2004. Phippen, Kari. Ancient Egypt – culture: The ancient Egyptian people’s dependence on the Nile. . Accessed 11 October 2004. Potable water through solar energy. The Tribune – India. 18 March 2003. . Accessed 11 October 2004. University of South Florida Department of Civil and Environmental Engineering. Water resources and environmental systems. Flyer. VOC polluted water remediation technology. Sasakura Engineering Company Ltd. . Accessed 11 October 2004.

Goal Write Up

Alex used the concept of â€Å"theory of constraints (TCO)† and new set of measurements and goals with the help of his mentor, Joana, to find constraints or bottlenecks in his plant. Joana defined bottleneck as any resource whose capacity is equal to or less then the demand placed upon it. This paper analyzes Argon's actions in The Goal with respect to the changes and tools that are available today and how the availability of newer tools in the manufacturing area might have affected the choices and priorities on which Ergo is focused.An integrated framework with TCO, Lean, and Six Sigma can maximize Argon's goals after evaluation of his goals, challenges, and application of the present day tools. New Tools Technological and operations management theory developments over the sat three decades provided new tools to Ergo if he faces his choices and priorities today. The most prominent of these are Lean operations, Six-sigma, internet, and various other software tools for operatio ns management effectiveness. ) Lean Operations: Lean operations theory focuses on smooth flow by removing the mud, a Japanese term for waste in the operations processes. Sources of waste are (GAG, 2009): over production, waiting, transportation, inventory, motion, over-processing defects, and not leveraging creativity of the employees. The five principles of Lean thin king are Woman & Jones, 1 996): Specify value from customer point of view, identify steps in the value stream, create smooth flow, customer pulls value, and pursue perfection.Thorough understanding and identification of the various wastes in the operations process can help Ergo to target improvement initiatives. B) Six-sigma: The main objective of Six-sigma DYNAMIC (Define- Measure-Analyze-lampooner-Control) methodology is improving processes and quality through reduction of defects to the extent of 3. 4 defects per million, reduce cycle time, increase throughput, and increase customer satisfaction by educing variation in products and processes, thus giving an organization a competitive advantage (GAG, 2009).Jack Welch emphasizes by calling variation as â€Å"evil† (III, 2014). â€Å"The methodology looks at a statistical number to determine whether or not to make a change in a company manufacturing process† (Stephen, 2009). Availability of Six-sigma methodologies would have helped Alex increase throughput while improving the quality and reducing variation in the products and processes. C) Internet and Software: Internet provided many tools for the operations manager over the past two decades.These tools increased efficiencies of the production processes by finding the information in minutes, tracking people, and running complex operations management software on the internet. They range from communications and search engine tools, to the more recent cloud based hosted MM applications on the internet such as customer relationship management SW such as Salesrooms etc. Sophisticated so ftware packages and simulation tools also include enterprise resource planning (ERP) which is an evolved version Of the material resource planning (MR.) that include other departments such as insane and order management packages.These tools would have helped Ergo to find Joana quickly, communicate with him on Keep, and conduct net meetings with divisional headquarters, track inventory and customer orders with ERP rather than the archaic homegrown information system. D) New MM Techniques: There are several new operations management techniques such as just-in-time (KIT) partnership with suppliers, Toyota production system (T AS), total quality management (TXT), supply chain management (SCM), and total productive maintenance (TAMP). . KIT focuses on continuous improvement through continuous and forced problem solving via focus on increasing through put and red icing inventory. KIT partnership between suppliers and purchasers reduce waste and drive down costs by removing unnecessary act ivities, in-plant and in-transit inventory, improve quality and reliability (Hazier & Render, 201 1). Ii. T AS three core components are continuous improvement, respect for people, and standard work practice (Hazier & Render, 201 1). Iii.Although KIT and Six-sigma are key components of the TXT, TXT provides other concepts and tools such as continuous improvement, employee empowerment, bench marking, Attaching concepts, and TXT tools to generate ideas (check sheets, scatter diagram, and cause- and-effect diagram), organizing data (Parent chart and flow chart), and identifying problems (histograms and statistical process control charts) (Hazier & Render, 201 1). Iv. The objective of SCM is to build a sequence of suppliers that focuses on maximizing value to the end customer (Hazier and Render, 2011).SCM process technique takes an integrated approach to procuring, producing, and delivering products and services to customers, veering the management of material, information and financial flows (Venerates, Hachure, & Caulker, 2007). V. TAMP is a manufacturing program designed primarily to maximize equipment life effectiveness through the participation and motivation of the entire work force (Ca, McKeon & Schroeder, 2001 Alex could make good use of these new MM techniques to increase effectiveness of his operations. Argon's Goals and New Tools The goal of any organization in general is to make money.Joana asks Ergo to change his plant measurements to the following measurements that express the goal of making money in a different way. These measurements are throughput, inventory, and operational expense. According to The Goal, definition of throughput is the rate at which the system generates money through sales. Inventory is all the money that the system has invested in purchasing things which the organization intends to sell, and operational expense is all the money the system spends in order to turn inventory into throughput.Then that the real goal of an organizati on is to increase throughput while simultaneously reducing both inventory and operating expense. Joana introduces Ergo to the TCO to help him achieve his goals and loving problems in his plant in terms of the measurements that express the goal of making money. TCO approach includes the following five steps to improve the plant performance: C] Step 1. Identify the system's constraint(s) C] Step 2. Decide how to exploit the system's constraint(s) C] Step 3. Subordinate everything else to exploit the constraint(s) CLC Step 4. Elevate the system's constraint(s) 0 Step 5.If in the previous steps, a constraint has been broken, go back to step 1, but do not allow inertia to cause a system's constraint. TCO primarily focuses on increasing throughput. When the current system constraint or bottleneck is resolved, a new system constraint is then identified creating a continuous cycle, which drives performance improvement forever. Because of this continuous improvement and focus on throughput, Argon's goal will remain the same in light Of the availability of the new tools. Several Of the new tools from these modern concepts can be applied to solve or improve the challenges faced by Ergo in the 1 ass's.New Tools Application to Ale's Challenges Ergo can bring several of the new tools to the challenges he faced at Unaware in the 1 9805. Some of these tools to improve the goals are: a) Lean production ass checklist: sort/segregate, simplify/straighten, shine/sweep, standardize, and sustain/self-discipline. This will help to address waste. B) pull system: This is a standard tool in KIT system to increase throughput and it is used with both suppliers and within the immediate production process (Hazier & Render, 201 1).Pulling the needed materials through the system in very small lots eliminates waste and inventory. C) Continuous Improvement: As a core component of T AS, continuous improvement builds an organization ultra that processes can be improved and that improvement is pa rt of every employee's responsibility (Hazier & Render, 201 1 Kamikaze is the formal process for this component believing that perfection is achieved through many incremental changes. Operations manager plays a key role in building kamikaze culture. ) Respecting and empowering people: TIPS empowers employees to stop process or machines when quality problems surface. TIPS respects employees by empowering them to enrich their jobs and lives. E) Scheduling: KIT scheduling tactics include communicate schedules to appliers, eliminate waste, produce in small lots, use Kansas, and make each operation produce perfect part. F) Inventory Management Systems: Ergo can establish these systems using BBC classification of all types of inventory and maintaining accurate records of the inventory. G) Forecasting: Forecasting demand has been a challenge for Ergo.He can make use of qualitative methods such as Delphi method as well as qualitative methods such as time- series forecasting to predict the d emand. Demand forecasts impacts plant capacity, human resources, and SCM (Hazier & Render, 201 1). Integrated Framework of TCO, Lean, and Six-Sigma Ergo and his team had to work with long established archaic management processes in the sass's setting. If The Goal were set in 2014, Ergo and his team would likely find management more willing to embark on a process of ongoing improvement including the new methodologies such as Lean and Six-sigma.However, these methodologies are not competing strategies, as each has significant value and applied differently with an integrated framework comprising of TCO, Lean, and Six-sigma. Ergo can make use of this integrated framework to maximize his goals. The integrated framework uses the synergy of TCO, Lean, and Six-Sigma to consistently achieve a concentrated system improvement beyond what might be accomplished by applying each method individually with a traditional continuous process improvement approach. The most efficient way to integrate TCO , Lean, and Six-Sigma starts with strategy as a first step (GAG, 2009).The strategy provides the strategic roadman to improve business performance. The strategic roadman provides the direction for the areas of the organization that maximizes benefit for the total system by applying improvements first. This continuous business success framework has two major parts: the constraint based system architecture and the TCO-Lean-Six-Sigma based continuous improvement architecture. A) Strategy- the output of a good strategy is a clear, agreed upon, roadman to improve business results.The focus is on optimizing the performance of the total system versus improving the individual functions in isolation. B) Design: This step determines the correct alignment of the business processes including changing any policies, measurements, roles and responsibilities, and information systems. C) Activate: During this step, the newly defined business processes are implemented. D) Improve: Improvements are ev aluated based on their ability to increase throughput, and to reduce inventory and operating expense and improve overall system performance. Jacob, Berglund & Cox 2009). Key performance indicators (Kepi's) are used to identify gaps between present and desired performance levels. Some useful improve techniques include AS system, TAMP, point of use storage (POLIS), Mistake proofing (Poke yoke), SSP, Capability Studies, Design of Experiments, etc. E) Sustain: As for the last step, Ergo should continuously review key measurement results to assess, address and institutionalize the policies, measurements and behaviors to guarantee that the results are sustained and do not degrade.Ergo can utilize the full integration of TCO, Lean and Six Sigma in order to obtain focused system improvement that achieves real, sustainable breakthrough performance. Although internet and internet based tools and sophisticated software packages certainly improve Argon's operations, they will not have direct im pact on the choices and priorities that Ergo has focused. With respect to the other lolls to help Ergo, the principles and techniques of KIT can be shifted to an entire SCM to strengthen Argon's SCM strategy in pursuit of improved organizational performance.